| English   Contact Us  Add to Favorites 4006-833-802
Sourcing Center
 
4006-833-802
Sourcing Center Your location > Home > Sourcing Center
150 g coated paper
Release Time2014/9/3 13:57:51     Reading7510 times
Name Unit Standard Test method
Thickness um 1453 GB/T451.3
Basis weight g/O 1502 GB/T451.2
Width mm Ordered width + 2 By dividing a direct measurement of the tape measure value of 1 mm
Length m
Tensile strength Transverse N/2.5cm 60 GB/T453 
Longitudinal N/2.5cm 150
Elongation at break Transverse % 7 GB/T453 
Longitudinal % 6
Heat shrinkage rate Transverse % 1 120 5min
Longitudinal % 0.5
Tear Transverse MN 2500 GB/T455-2002
Longitudinal MN 3500
Gloss % 70 GB/T8807
Whiteness % 88 GB/T7974
Moisture % 51 GB/T 462
Smoothness S 30 GB/T460
Paper core mm 762
 

Appearance:
1, drum face should level off, clean, can not have split;
2, paper should level off, there can be no wrinkles, folds, deformity, hole, various spots, sand, hard block and other effects using paper disease;
3, the colour and lustre of paper should be consistent;
4, Each volume joints shall not be more than one, and have joint volume is not greater than the whole order volume by 20%, joint marking should be colored paper.
Environmental requirements, in line with the ROHS directive, phthalates, EN71-3 standard.
Packing: inside to use thin film bag packing, paper packaging, moisture-proof, waterproof.
Other indicators according to gb/line mark, or the enterprise standard approved by the company. Base paper appearance, colour and lustre according to provide the pattern on both sides shall prevail.

 ContactsPurchase department Mobile telephone
 Tel0760-23372273 E_mail
 
Prev62 g white glassine paper Next80 g coated paper
Copyright © 2003-2014 Lecco (Zhongshan) Adhesive Products Co., Ltd. All Rights Reserved.
ICP09019312
AddressNo.68 Guangfu Avenue, Dongsheng Town, Zhongshan City Guangdong